With just a glance down the hallway, the SSW provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The two-sided, clear acrylic sign face glows bright green or red to indicate room availability. The sign face is custom engravable with the room number, name, or other designation. The complete sign assembly mounts to the wall over a single-gang electrical box or plaster ring.
Room Availability Status
For room scheduling applications, the SSW simply connects to a Crestron TSW-760 or TSW-1060 touch screen via USB. No special programming or configuration is required. The sign color is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service. The sign illuminates green when the room is available and red when the room is occupied.
Custom RGB Color Mixing
For custom applications, the SSW can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing requires the SSW to be connected to a Crestron control system via Cresnet®. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.
The SSW is available with or without custom engraving. The engraving appears on both sides of the acrylic sign face to identify the room by name or number. When illuminated, the engraving is clearly visible at a distance of 50 feet or 15 meters. Engraving can be changed at any time by purchasing a replacement sign face (model SSW-ACR).
Installing the SSW is simple. It mounts to the wall over a standard 1-gang electrical box or plaster ring. Power and communications are supplied by a single USB or Cresnet wire. For typical room scheduling applications, a six foot (1.83 meter) USB cable is included, which connects to the touch screen mounted below. For custom applications, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple SSW hallway signs using a single cable.[1,2]
Mullion Mounting Option
When a suitable wall surface is not available, the SSW can be mounted to the mullion of an interior glass wall, window, or partition using the optional SSW-MUMK Mullion Mount Kit (sold separately). The same kit may also be adhered directly to the glass or any other smooth surface.
|Manufacturer Part Number||SSW-102 KIT|
|Garantietermijn||Op dit product krijg je 1 jaar garantie.|